Assembly & Set-Up - Cub Cadet SC 100 Operator's Manual

Assembly & Set-Up
Contents of Carton
• One Lawn Mower
• One Lawn Mower Operator's Manual •
Assembly
NOTE: This unit is shipped without gasoline or oil in the engine.
Fill up with gasoline and oil as instructed in the accompanying
engine manual BEFORE operating your mower.
Handle
1. Remove any packing material which may be between
upper and lower handles.
a. Remove wing nuts and carriage bolts from handle
as shown in Figure 3-1. Do not loosen or remove
adjacent hex head screws.
A
Figure 3-1
b. While stabilizing mower so it doesn't move, pivot
upper handle up as shown in Figure 3-2. Do not
crimp cables while lifting the handle up.
• One Grass Catcher
One Engine Operator's Manual
A
2. Remove the T-bolts from the handle brackets as shown in
Figure 3-3.
• One Bottle of Oil
• One Side Discharge Chute
B
Figure 3-2
Figure 3-3
3
9