Description
The GS‐1008P is an 8‐port 10/100/1000BASE switch wit
sized network environments. This product is compact in
gives users the option of installing it in a 19" cabinet wit
Complies with IEEE 802.3at Power over Ethernet (PoE)
The GS‐1008P features 8 IEEE 802.3at Power over Ethe
per port. It can convert standard 100‐240V AC power in
to supply power to IEEE 802.3at compliant network acc
verify whether the connected device is IEEE 802.3at com
through the LAN cable. The GS‐1008P can connect with
cameras and IP phones. It is the best solution for when
outlets are too far from the device.
No Special Networking Cable Required
The standard Cat‐5 Ethernet cable is used to link the GS
can transmit both data and power. No separate power
installation time and costs.
Fan‐Less Design
Since the fan‐less design ensures quiet operation in sma
SOHO environments.
SOHO
i
t
Copyright © 2012 Edimax Technology Co. Ltd. All rights reserved. Maximum
network conditions and environmental factors. Product specifications and d
8-Port Gi
igabit Ethernet PoE+ Switch
th 8 PoE ports, designed for use in small or medium
n size, making it ideal for users with limited space. It also
th rack‐mount kits or underneath a desk.
)
rnet (PoE) ports, which supply up to 30 watts of power
nto low‐voltage DC, which runs over existing LAN cables
cessories. The GS‐1008P also features PoE detection, to
mpliant; if it is not a PoE device, only data will be sent
h a variety of PoE products, including access points, IP
power outlets are difficult to install or the power
S‐1008P and the powered devices. This Ethernet cable
cable is needed for the powered devices, thus reducing
all office spaces, the GS‐1008P is an ideal solution for
m performance, actual data rates, and coverage will vary depending on
design are subject to change without notice.
GS-1008P