Weslo Pursuit 6.0 Dx Bike User Manual page 5

1. While another person lifts the front of the Frame (1)
slightly, attach a Stabilizer (2) with two M10 x 65mm
Carriage Bolts (30) and two M10 Nylon Locknuts (33).
2. Attach the other Stabilizer (2) to the Seat Frame (5)
with two M10 x 65mm Carriage Bolts (30) and two
M10 Nylon Locknuts (33).
3. Insert the Seat Frame (5) into the Frame (1). Next,
firmly press the Seat Frame Bushing (20) into the
Frame. Attach the Seat Frame Bushing with two M4 x
5mm Screws (65).
Tighten the Adjustment Knob (9) into the Frame (1).
Carefully tip the exercise cycle onto its side. Attach the
two Bumpers (66) to the Frame (1) with two M4 x
8mm Screws (64). Then, tip the exercise cycle back
onto the Stabilizers (2).
4. Attach the Left and Right Seat Brackets (52, 53) to the
Seat Frame (5) with two M8 x 115mm Bolts (57), four
M8 Washers (14), and two M8 Nylon Locknuts (10) as
shown. Do not tighten the Nylon Locknuts yet.
1
30
2
33
3
9
1
65
66
64
4
14
10
14
5
2
1
33
5
33
2
65
20
5
2
57
14
5
14
53
52
30