Assembly - Weslo Pursuit 6.0 Dx User Manual

ASSEMBLY

Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove the packing
materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tools, assembly requires a Phillips screwdriver , an adjustable
wrench , and pliers .
Use the drawings below to identify the small parts used for assembly. The number in parenthesis below each
drawing is the key number of the part, from the PART LIST on page 14. The number following the key number is
the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in
the parts bag, check to see if it has been preassembled.
M4 x 5mm M6 Washer M8 Split
M4 x 8mm
M4 x 16mm
Screw (65)–2 (61)–8 Washer (42)–2
Screw (64)–2
Screw (49)–1
M8 Washer
M8 Nylon M10 Nylon
M6 Nylon
(14)–4
Locknut (10)–4 Locknut (33)–4
Locknut (63)–4
M6 x 32mm Bolt M6 x 38mm Screw M8 x 48mm Button Bolt (59)–2
(62)–4
(60)–8
M10 x 65mm Carriage Bolt (30)–4
M8 x 125mm Bolt (57)–2
4