Assemble The Front Brake - Schwinn Meridian Owner's Manual

Assemble the Front Brake

!
Failure to properly set the brakes may result in the
inability to stop the tricycle movement and cause serious
injury or death . Be sure the brakes are functioning
properly before using the tricycle .
Note: The tricycle is shipped with the brake cable
attached to the brake lever . Follow these steps if there
is a need to re-attach the brake cable to the brake lever:
1 . Rotate the cable adjustment barrel and cable nut
until the slots are aligned with the slot on the brake
lever body .
2 . Press the brake lever towards the grip .
3 . Slide the brake cable through the slots and place the
cable head into the brake lever .
4 . Release the brake lever .
5 . Lightly pull on the cable, and rotate the cable nut
and cable barrel so they are no longer aligned .
Schwinn Meridian Manual R3 0918112 .indd 18
WARNING!
cable adjustment
barrel slot cable nut slot
1
brake lever slot
3
brake cable
5
2
brake lever
cable head
4
9/18/12 3:44 PM
18