Assemble the Front Brake
WARNING!
!
Failure to properly set the brakes may result in the
inability to stop the tricycle movement and cause serious
injury or death. Be sure the brakes are functioning
properly before using the tricycle.
Note: The tricycle is shipped with the brake cable
attached to the brake lever. Follow these steps if there
is a need to re-attach the brake cable to the brake lever:
1 . Rotate the cable adjustment barrel and cable nut
until the slots are aligned with the slot on the brake
lever body.
2 . Press the brake lever towards the grip.
3 . Slide the brake cable through the slots and place the
cable head into the brake lever.
4 . Release the brake lever.
5 . Lightly pull on the cable, and rotate the cable nut
and cable barrel so they are no longer aligned.
cable adjustment
barrel slot cable nut slot
1
brake lever slot
3
brake cable
5
2
brake lever
cable head
4
18