Haier 10515690 Operation Manual page 6

DEHUMID mode
1. Start
Press POWER button.
2. Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Then select DEHUMID operation.
When the DEHUM display lights bright, The unit will be
working under the dehumidify function.
If you need to only remove the moisture press the
Dehnmid button. Change air flow direction if necessary.
3. Select temp. setting
4. Fan speed selection
If you choose the FAN SPEED mode you can run the
fan in one of the 2 speeds:HIGH OR LOW.
Air conditioner is running under displayed fan speed.
In DRY mode, when room temperature becomes
lower than temp.setting+2
at LOW speed regardless of FAN setting.
5. Stop
The compressor may cycle for 10 minutes on and 6 minuters off in
Dehumid mode.
FAN COOL
o
C,unit will run intermittently
FAN SPEED
DEHUM
COOL operation starts when room
temp.is higher than temp.setting.
Temp.setting+2 C
Temp.setting
5
5
FAN SPEED
4
Ultra-low air flow
On reaching temp.setting +2 C
unit will run in mild DRY mode.