Group Control - Toshiba RBC-AMS51E-EN Owner's Manual

Lite-Vision plus Remote Controller

Group control

The following functions can be set individually for each unit when the group control is used:
"Wind direction setting", "Individual louver setting", "Swing type setting", "Louver lock setting", "Auto grille setting"
Operate the remote controller according to the procedure below before setting each function.
Wind direction
1 – 1 1 – 4
1 – 2 1 – 5
1 – 3
Return
Unit
Wind direction
1 – 4
1 – 1
1 – 5
1 – 2
1 – 3
Return
Unit Set
1–1 Wind direction
Return
Swing ON
ALL
Set
ALL
Louver
1
Select the group-controlled function on the
menu screen, then push the "
Set" [ F2] button.
2
Push the "
select the unit to set.
The selected unit changes as follows each time
the button is pushed:
1-1
3
Push the "
The setting display for the selected unit
appears.
4
Push the [
Pushing the [
the previous screen.
Pushing the [
"Swing type", "Louver lock", or "Auto grille"
shows " SETTING" on the screen.
• The number (address) of the selected unit appears
on the upper left of the screen, unless "All" is
selected for the unit selection.
• "All" is not available for some settings.
– 38 –
Owner's Manual
Set
unit" [ F1] button to
Unit
1-2 ALL
Set" [ F2] button.
Set
CANCEL] button.
CANCEL] button returns to
CANCEL] button when setting
EN