Set Day And Time - Bryant Evolution Connex SYSTXBBECW01-A Owner's Manual

To access your system mode touch the MODE label located in the upper
S
right of the control.
The drop- - down menu will allow you to choose between AUTO, HEAT,
S
COOL, FAN ONLY and OFF.
If OFF is selected that means your heating and cooling systems are not
S
operational.
If AUTO is selected, the Evolution Connex Control automatically
S
switches between heating and cooling to maintain your comfort during
transitional seasons.
If HEAT is selected then the Evolution Connex Control operates only the
S
heating system.
If COOL is selected then the Evolution Connex Control operates only
S
the cooling system.
If FAN ONLY is selected, then the Evolution Connex Control operates
S
the indoor fan.

Set Day and Time

To set the day and time for your home screen enter the main screen by
S
touching anywhere on the control.
Touch the DAY and TIME label located at the top middle of the screen
S
or access by going through the menu screen (see page 18).
To set the HOUR, MINUTE, MONTH, DAY, or YEAR touch the fea-
S
ture you wish to change.
Use the Up (Y) and Down (B) buttons to make the appropriate
S
changes.
When you have completed all of the settings, touch SAVE.
S
If you make a mistake you may touch CANCEL and begin again.
S
5