Installing The Right Base Panel; Removing The Thermal Module - Dell Latitude E5430 Owner's Manual

Installing the Right Base Panel

1. Place the right base panel on the computer.
2. Tighten the screws that secure right base panel to the computer.
3. Install:
a) access panel
b) battery
4. Follow the procedures in After Working Inside Your Computer.

Removing the Thermal Module

1. Follow the procedures in Before Working Inside Your Computer.
2. Remove:
a) SD memory card
b) battery
c) access panel
d) right base panel
3. Remove the screws that secure the thermal module in place.
4. Lift up the thermal module and remove it from the computer.
29