GE NetworX NX-1500E User Manual page 12

NX-1500E LED Keypad
includes NX-1508E and NX-1516E
ARMED Light is "on" when armed, "off" when
disarmed. Flashes to indicate a previous alarm.
READY Light is "on" when the system is ready to
arm, flashes if ready to "Iorce arm".
POWER Light is "on" when AC power is present,
flashes to indicate a low battery condition.
INSTANT Light is "on" when there is no entry delay.
SERVICE Light is "on" to indicate a trouble condition
with your system.
FIRE Light is "on" to indicate fire alarm, flashes to
indicate a trouble condition with your fire system.
ZONE LIGHTS are on steady to indicate bypass,
slow flash for zone fault, fast flash for service
condition.
5 FUNCTION KEYS perform various functions.
NUMERIC CODE ENTRY KEYS
3 PROGRAMMABLE EMERGENCY
ACTIVATION KEYS
The door is detachable and can be removed or
replaced when desired.
The appropriate boxes should be marked on the door
of your keypad for the Emergency Activation keys
that are programmed to work with your system.
This system is
Your System is programmed for the functions
checked below:
Fire Emergency
Chime Feature
Group Bypass
Aux Emergency
Quick Arm
Police Emergency
NOTE: Some of the features described above mayor
may not be available for your system. Check with your
installation company to find out how your system is
programmed.
is not partitioned.
Siren Test
Abort Delay
Re Exit Feature
Cancel Alarm
Battery Test
Forced Arming