Quick Start Guide - Samson Stage v166 Owner's Manual

Quick Start Guide

Follow these basic procedures for setting up and using your Stage v166 Series Wireless System.
1. Connect the SR166 receiver power
adaptor to the rear panel DC input, and
then to an electrical outlet.
2. Connect the receiver's appropriate ¼" output to the input of a mixer, stereo, karaoke machine,
or any other line level input (see below).
Use the included ¼" to ¼" cable to connect
the SR166 receiver to a mixer.
Use the included ¼" to ¼" cable to connect
the SR166 receiver to karaoke machine.
Owner's Manual
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
2. Plugging the receiver into a mixer using 1/4" - 1/4" cable.
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable
4. Plugging the receiver into a Karaoke machine using 1/4" - 1/4" cable.
Stage v166: Handheld Wireless System 9