Motion Detection - Axis 210 User Manual

Motion Detection

The motion detection feature is used to generate an alarm whenever movement occurs (or
stops) in the video image. A total of 10 Include and/or Exclude windows can be
configured.
• Included windows target specific areas within the whole video image
• Excluded windows define areas within an Include window that should be ignored
(areas outside Include windows are automatically ignored)
Once configured, the motion detection windows will appear in the list of available triggers,
for triggering events. See How to set up a triggered event, on page 31.
Note:
Using the motion detection feature may decrease the camera's overall performance.
How to configure Motion Detection
1. Click Motion Detection in the Event Configuration menu.
2. Click the Configure Included Window
3. adio button.
4. Click New.
5. Enter a descriptive name under Window name.
6. Adjust the size (drag the bottom right-hand corner) and position (click on the text
at the top and drag to the desired position).
7. Adjust the Object size, History and Sensitivity profile sliders (see table below for
details). Any detected motion within an active window is then indicated by red
peaks in the Activity window (the active window has a red frame).
AXIS 210/211/211A - Event Configuration
33