Pre-Ride Inspection - KYMCO XCITING 250 Owner's Manual

PRE-RIDE INSPECTION

For your safety, it is very important to take a few
moments before each ride to walk around your
scooter and check its condition. If you detect
any problem, be sure you take care of it, or
have it corrected by your KYMCO dealer.
WARNING
Improperly maintaining this scooter or
failing to correct a problem before
riding can cause a crash in which you
can be seriously hurt or killed.
Always perform a pre-ride inspection
before every ride and correct any
problems.
1. Engine oil level: add engine oil if required
(page 68) . Check for leaks.
2. Fuel level: fill fuel tank when necessary
(page 30) . Check for leaks.
3. Coolant level: add coolant if required. Check
for leaks (page 85)
4. Front and rear brakes: check operation;
make sure there is no brake fluid leakage
(page 89) .
5. Tires: check condition and pressure
97) .
6. Throttle: check for smooth opening and full
closing in all steering positions.
7. Lights and horn: check that headlight,
tail/brake light, turn signals, indicators and
horn function properly.
8. Engine stop switch: check for proper function
(page 26).
9. Side stand ignition cut-off system: check for
proper function (page 88)
10. Steering: check for condition and
smoothness.
44
.
(page
.