KYMCO XCITING 250 Owner's Manual page 76

3. Remove the oil drain plug (2) to drain the oil.
4. Reinstall the drain plug and tighten the drain plug to
specification.
Oil drain plug torque: 25 N-m (2.5 kgf-m, 18lbf-ft)
5. Fill the engine with oil and install the oil fill cap.
Oil capacity (after draining):
XCITING 500 AFI/XCITING 500:
XCITING 250 AFI/XCITING 250:
6. Start the engine and let it idle for 2 3 minutes.
7. Stop the engine and check that the oil level is at the
upper level mark on the oil filler cap/dipstick with the
scooter upright on firm, level ground. Make sure there
are no oil leaks.
NOTE:
!
Running the engine with insufficient oil pressure may
cause serious engine damage.
!
Let the engine and exhaust system cool before working
in those areas.
2.0 liter (2.1 US qt, 1.8 lmp qt)
0.9 liter (0.95 US qt, 0.8 lmp qt)
－
70
(2)