Table of Contents
Advertisement
1)
DISK ARRAY PORT:
Connect to disk array for extend HDD capacity.
2)
IR:
Connect to IR receiver.
3)
RS485:
Connect to external device (such as PTZ camera) with RS485-A and RS485-B.
4)
EXTERNAL I/O PORT:
Connect to external device. Control external device or get controlled remotely by
external device (alarm input, external alarm, PTZ camera).
5)
USB PORT:
Support firmware update and files backup.
6)
D/V PORT (Digital Video Port):
Connect to VGA connector card.
7)
LAN:
Connect to Internet by LAN cable.
8)
LINK / ACT LED light:
When the Internet is activated, the LED light will turn on.
9)
CALL MONITOR:
Connect to CALL monitor. Show the channel switch display. When the alarm is
triggered, the call monitor will show the image of the triggered channel for a period of
time.
10)
POWER:
Connect to provided adapter.
11)
FAN:
For ventilation.
12)
VIDEO INPUT (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) :
Connect to video source, such as camera.
13)
LOOP (CHANNEL 1 – 16 / CHANNEL 1 – 8 / CHANNEL 1 – 4) :
Video output.
14)
75Ω / HI:
When using Loop function, please switch to HI. When you don't use Loop function,
please switch to 75Ω.
15)
MONITOR:
Connect to Main monitor.
16)
AUDIO IN (1-4):
Connect to audio source, such as camera which equipped with audio function.
When users start the recording function, the audio input will be recorded .
17)
AUDIO OUT :
Connect to monitor or speaker.
With 2 mono audio outputs from the same source.
9
Hide quick links:
Advertisement
Table of Contents
