Lennox Hearth Products Montage 32FS Installation And Operation Manual page 15

Standard Horizontal Installation Configurations
Montage™ 3FS
Maintain minimum clearances specified by vent manu-
facturer between wall and pipe. If you vent to the furthest
wall, the vent pipe must maintain the specified clearance
parallel to the other wall.
Figure 16 - Montage 32FS, Corner Through the Wall
6" (15 mm)
Minimum
Figure 17 - Montage 32FS, Parallel Through the Wall
1" Min.
Wall
Hearth Pad / Floor Protection
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE
Top View Illustration
1" Min.
Wall
Notes:
• It is not recommended to terminate
Note: Horizontal run of pipe requires
1/4" (7 mm) rise per foot.
" (51 mm)
Minimum
Wall
exhaust vent on the prevailing wind
side of the house.
Outdoors
45 Degree
Elbow
1" (305 mm)
Minimum From
Outer Wall
1"(305 mm) From
Ground or Other Surface
15