NEC US40a User Manual page 2

Trademarks
Citrix, ICA (Independent Computing Architecture), and Program Neighborhood are registered trademarks of Citrix Systems,
Inc. in the USA and other countries. Citrix Presentation Server, Citrix XenApp, and SpeedScreen are trademarks of Citrix
Systems, Inc. in the USA and other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
All other product, brand, or trade names used in this publication are the trademarks or registered trademarks of their
respective trademark owners.
Windows Server 2003 stands for Microsoft® Windows Server® 2003, Standard Edition operating system, or Microsoft®
Windows Server® 2003, Enterprise Edition operating system.
Windows 2000 stands for Microsoft® Windows® 2000 Server operating system, Microsoft® Windows® 2000 Advanced
Server operating system, or Microsoft® Windows® 2000 Professional operating system.
Windows XP stands for Microsoft® Windows® XP Home Edition operating system, or Microsoft Windows XP Professional
operating system. Windows XP Embedded stands for Microsoft® Windows® XP Embedded.
Windows NT stands for Microsoft® Windows NT® Server network operating system version 3.51/4.0, or Microsoft®
Windows NT® Workstation operating system version 3.51/4.0.
Windows Me stands for Microsoft® Windows® Millennium Edition operating system.
Windows 98 stands for Microsoft® Windows®98 operating system.
Windows 95 stands for Microsoft® Windows®95 operating system.
Windows CE 5.0 stands for Microsoft® Windows® CE Version5.0.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide the reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures.
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment to an outlet on a circuit different from the one to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use a shielded and properly grounded I/O cable to ensure compliance of this unit to the specified limits of the rules.
Notes:
(1) No part of this manual may be reproduced in any form without the prior written permission of NEC Corporation.
(2) The contents of this manual may be revised without prior notice.
(3) The contents of this manual shall not be copied or altered without the prior written permission of NEC Corporation.
(4) All efforts have been made to ensure the accuracy of all information in this manual. If you notice any part unclear,
incorrect, or omitted in this manual, contact your service representative.
(5) NEC assumes no liability arising from the use of this product, nor any liability for incidental or consequential damages
arising from the use of this manual regardless of Item (4).
(6) If you find any missing pages or pages out of order in this manual, please contact your service representative for a
replacement.
©
NEC Corporation 2008, 2009