Memory Settings; Adjustable Pedals; Automatic Climate Controls - GMC Sierra 2008 Getting To Know Manual

Memory Settings (if equipped)
The memory buttons are located on the
driver's door next to the heated seat
controls. Settings can be programmed
for the driver's seat, the outside mirrors
and the adjustable pedals (if equipped)
for two drivers.
To save memory settings:
1. Adjust the driver's seat, outside
mirrors and pedals to a comfortable
position.
2. Press and hold button 1 or 2 until two
beeps sound.
3. Repeat these steps for a second
driver using the other memory button.
To recall the settings, press memory
button 1 or 2 with the vehicle in Park. If
the Remote Keyless Entry transmitter is
used to enter the vehicle and the memo-
ry seat recall feature is on (see Driver
Information Center), the settings will be
recalled automatically.
Easy Exit Seat
The easy exit seat button is located
between the two memory buttons. Press
the exit button, with the vehicle in Park,
to move the driver's seat to the exit
position.
If the easy exit seat feature is on (see
Driver Information Center), automatic
seat movement will occur when the key
is removed from the ignition.
See Section 1 of your Owner Manual.
Adjustable Pedals (if equipped)
The accelerator and brake pedals can
be adjusted to a comfortable and safe
operating position by using the
adjustable pedals switch located on the
instrument
panel below
the climate
controls.
Press the top
arrow on the
switch to move
the pedals
away from you
and the bottom arrow on the switch to
move the pedals toward you.
The pedals cannot be adjusted when the
vehicle is in Reverse or when cruise
control is activated.
See Section 2 of your Owner Manual.

Automatic Climate Controls

(if equipped)
The automatic climate control system
maintains the desired individual temper-
ature for the driver and front seat pas-
senger. The system adjusts the airflow
mode, fan speed, air conditioning and
recirculation functions to reach the set
temperature(s) as quickly as possible.
Automatic Operation
To set the automatic mode:
1. Press the AUTO button.
2. Set the driver's and front passenger's
temperature using the + or – temper-
ature buttons.
9