Table of Contents
Advertisement
12
Getting to Know Your Sierra
To store favorite stations:
1. Press the BAND button to select the
band (AM; FM; or XM, if equipped).
2. Tune in the desired radio station.
3. Press the FAV button to display the
page where the station is to be
stored.
4. Press and hold one of the six push-
buttons until a beep sounds.
5. Repeat the steps for each pushbutton
on each page.
Setting the Time
To set the time (without Date Display):
1. Turn on the radio.
2. Press the
(Clock) button until the
hour numbers begin flashing on the
radio display. Press the button again
to adjust the minute numbers.
3. With either the hour or minute num-
bers flashing, use the
to select the time.
4. Press the Clock button again to set
the currently displayed time.
To set the time (with Date Display,
if equipped):
1. Turn on the radio.
2. Press the
(Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton
3. Press the pushbutton under any of
4. Press the pushbutton again, the right
5. Press the Clock or MENU button
MP3 Capability (if equipped)
Your audio system has MP3 playing
capability. A CD-R or CD-RW disc con-
taining MP3 audio tracks will play auto-
matically when inserted into the CD
player. An MP3 label will be displayed.
Radio Data System (if equipped)
When you tune to a Radio Data System
(RDS) station, the station name and call
letters will appear on the display instead
of the frequency. RDS stations may also
provide the time of day, a program type
for current programming and the name
of the program being broadcast.
(Tune) knob
RDS features are available for use only
on FM stations that broadcast RDS
information. RDS relies on receiving
specific information from these stations
and will work only when the information
is available.
See Section 3 of your Owner Manual.
located under the clock option label.
The HR, MIN, MM, DD, YYYY labels
will appear on the display.
the labels to be changed.
SEEK arrow or the FWD button to
increase the numbers. Press the left
SEEK arrow or the REV button to
decrease the numbers. Rotating the
(Tune) knob also will increase or
decrease the selected label.
again to set the currently displayed
time and date.
Advertisement
Table of Contents
