Table of Contents
Advertisement
32 Service Search
1. Press the
V
then will start to rotate the antenna to the east as long as
it can. Here the
2. Save the value by pressing the
stopped.
3. Press the
V
ator then will start to rotate the antenna to the west as
long as it can. Here the
4. Save the value by pressing the
stopped.
After that, you can configure the actuator settings in two ways.
One is automatic setting, the other is manual setting. In auto-
matic setting you can get antenna positions for all satellites you
want to catch; meanwhile, you can do for only one satellite in
manual setting.
If you wish to carry out this process at a stroke, select the Auto
Setting menu; otherwise, select the Manual Setting menu.
In automatic setting, you have to repeat positioning process for
three satellites in the following order:
The positioning process is as follows:
button at the East Limit option; the actuator
button stands for the east.
V
button on the West Limit option; the actu-
button stands for the west.
V
1. For the satellite that is located
on the westernmost.
2. For the satellite that is located
on the midst.
3. For the satellite that is located
on the easternmost.
button when it
F1
button when it
F1
Advertisement
Table of Contents
