Radio Frequency Output; Local Time Setting - Topfield TF 5000 CIP User Manual

Digital satellite receiver with actuator controller

Hide thumbs Also See for TF 5000 CIP:

Table of Contents

3.2.6 Radio frequency output

Table 3.1: Television standards by country

Signal type

PAL G

PAL I

PAL K

NTSC M

Apart from this setting, you can change the sound mode with

the

button. See §

If you have connected your television to the RF OUT socket,

you should conﬁgure the radio frequency output. The digital

receiver can make analogue television from digital television

and output it via the RF OUT socket.

Set the RF Output option to the television standard that your

country supports referring to Table 3.1.

Country

Australia, Austria, Cyprus, Czech Republic, Egypt, Estonia, Finland, Germany,

Greece, Iceland, Iran, Israel, Italy, Kuwait, Latvia, Libya, Lithuania, Luxem-

bourg, Netherlands, New Zealand, Norway, Portugal, Slovakia, Slovenia,

Spain, Sweden, Switzerland, Syria, Yugoslavia

Hong Kong, Macao, Republic of Ireland, South Africa, United Kingdom

Czech Republic, Hungary, Poland

Bahamas, Belgium, Bolivia, Chile, Ecuador, Fiji, Guam, Jamaica, Mexico,

Panama, Peru, United States, Venezuela

Set the RF Channel option to a channel number as you desire.

You then have to retune your television set to the new channel

number.

You should set your local time for timer events. If you do not

set the local time right, the programme time table provided by

the programme guide may be distrustful. For the programme

guide, refer to § 5.3.

5.2.4

for detailed description.

3.3 Local time setting 21

Table of Contents