Select the speaker layout for the number of speakers that you are using and place the speakers and subwoofer (with built-in amplifier) in your room. This section describes the
representative speaker layout examples.
Caution
• (U.S.A. and Canada models only)
Under its default settings, the unit is configured for 8-ohm speakers. When connecting 6-ohm speakers, set the unit's speaker impedance to "6 Ω MIN". In this case, you can also use 4-ohm speakers as the front speakers.
For details, see "Setting the speaker impedance" (p.14).
• (Except for U.S.A. and Canada models)
Use speakers with an impedance of at least 6 Ω.
Speaker type
Abbr.
1
Front (L)
Produce front right/left channel sounds (stereo sounds).
2
Front (R)
3
Center
Produces center channel sounds (such as movie dialogue and vocals).
4
Surround (L)
Produce surround right/left channel sounds.
5
Surround (R)
Produces LFE (low-frequency effect) channel sounds and reinforces the bass parts of other channels.