Resetting To Factory Settings - Topfield TRF-7170 User Manual

You should set the Search Mode option to Auto for the first
time after connecting up the digital receiver, then the digital
receiver will search for all available services.
You may choose to only search for the services of a specific
transponder since more than one service are provided via each
transponder. Set the Search Mode option to Manual, then se-
lect your desired transponder at the Channel option. The num-
ber ranges from 6 to 12 in VHF and 28 to 69 in UHF.
It is possible to search single service in a certain transponder
only if you know the desired service's audio and video packet
identification (PID). Set the Search Mode option to Advanced,
then the PID option becomes enabled. Specify the PIDs of your
desired service with the numeric buttons.
To start service search, move down to the Start Search item,
and press the
search for services and display a list of television and radio
services as they are found. It is common for no channels to be
found until quite late in the process. When the scan is com-
plete, you will see a message telling you how many services
have been found. Press the

3.2 Resetting to factory settings

The digital receiver maintains the following data:
You can reset all data of the digital receiver. Select the Instal-
lation > System Recovery > Factory Setting menu, and then
you get asked for confirmation. With the choice of Yes, the
services list, favourite list and timer list will all be cleared, and
preference options will be reset to the manufacturer's factory
settings.
£
¢ ¡
button. The digital receiver will start to
OK
• Services list
• Favourite list
• Timer list
• Preference settings
3.2 Resetting to factory settings 17
£
¢ ¡
button to save the list.
OK