Cleaning Instructions - Wells BT-218T Operation Manual

CLEANING INSTRUCTIONS

CAUTION:
Electric Shock
Hazard
Disconnect appliance
from electric power
before cleaning.
CAUTION:
Burn Hazard
Allow appliance to cool
completely before
cleaning.
CAUTION:
Electric Shock
Hazard
Do not submerge
appliance in water.
IMPORTANT: DO NOT spill
or pour water into controls,
control panel or wiring.
DO NOT submerge appliance
in water. Damage to internal
components will occur.
Damage to internal
components from water
damage is not covered by
warranty.
PREPARATION
FREQUENCY
TOOLS
CLEANING
DO NOT SUBMERGE TOASTER IN WATER.
DO NOT SPLASH OR POUR WATER ONTO POWER
SWITCH, CONTROLLER, TIMER SWITCH, COOKING
BLADE OR BLADE SUPPORT.
1. Remove DRIP TRAY. Empty drip tray. Clean drip tray
in a sink using warm water and a non-abrasive
detergent, or in a dishwasher.
2. Wipe exterior surfaces of toaster with a soft cloth
dampened with warm water and mild detergent.
3. COOKING BLADE may be cleaned with a soft cloth and
non-abrasive cleanser if necessary. Rinse by wiping
with a clean soft cloth dampened with warm water.
4. Reinstall drip tray. Plug toaster into electrical
receptacle.
6
Press POWER SWITCH to OFF
Allow toaster to cool completely before
cleaning
Unplug toaster from receptacle before
cleaning
Daily, or as needed
Mild Detergent, Non-abrasive cleanser
Soft Cloth or Sponge