Important Safety Instructions; Save These Instructions - Liebert GXT3-10000T230 User Manual

I S
MPORTANT AFETY

SAVE THESE INSTRUCTIONS

WARNING
!
Opening or removing the cover may expose you to lethal voltages within this unit even when
it is apparently not operating and the input wiring is disconnected from the electrical source.
Observe all cautions and warnings in this manual. Failure to do so may result in serious
injury or death. Refer all UPS and battery service to qualified service personnel. Do not
attempt to service this product yourself. Never work alone.
This manual contains important safety instructions that must be followed when installing, operating
and maintaining the Liebert GXT3-10000T230 uninterruptible power system (UPS).
Read all safety, installation and operating instructions before installing or operating the UPS. Adhere
to all warnings on the unit and in this manual. Follow all operating and user instructions.
The Liebert GXT3-10000T230 is not intended for use with life support or other designated critical
devices. The UPS is designed for data processing equipment. If uncertain the intended use for this
UPS, consult your dealer or Liebert representative.
This device serves as an uninterruptible power supply for connected loads. Maximum load must not
exceed that shown on the UPS rating label. The device is in compliance with all relevant safety regu-
lations concerning information technology equipment, including electronic machines for use in an
office environment.
Depending on the type and rating of UPS device, certain configurations of battery extensions may be
connected. These battery extensions may be connected only to the compatible basic UPS unit.
WARNING
!
Liebert considers the safety of personnel to be of paramount importance. For this reason it is
essential that procedures relating to safety be studied before commencing work and properly
adhered to thereafter.
The user or operator may intervene in the operation of the UPS provided that the instructions
laid out in Notes Regarding the EU Declaration of Conformity on page 3 are strictly
adhered to.
The installation of the UPS, described in Installation on page 8, may only be carried out by
qualified technical personnel.
Even when all switches and interrupters are open, hazardous voltages are present within the
UPS; any operation that requires protective panels to be opened or removed may be carried
out by Liebert authorized technical personnel only.
I
NSTRUCTIONS
1