Recall Mode; Restore Default Settings; Emergency Default; Eco Mode - Motorola D4 User Manual

u d
3. Press or to select
m
press to confirm.
6.5

Recall mode

Depending on your country and network operator, your D4
has the recall time set as 600 ms (RECALL 2). It is unlikely
that you need to change this setting unless advised to do so.
m d
1. Press , scroll
d
RECALL
2. Scroll to and press
u d
3. Press or to select
RECALL 2
(long flash time) and press
6.6

Restore default settings

You can restore your D4 to its default (original) settings.
All the handsets that are registered to the base will be
retained.
WARNING
Resetting your phone to its default settings will delete all
entries in the Phonebook and Calls list. All handset and base
settings will also be reset.
m d
1. Press , scroll
d
DEFAULT
2. Scroll to and press
3. Enter the 4 digit PIN code (default = 0000) and press
CONFIRM ?
The display shows
22
TONE DIAL PULSE DIAL
or and
m
SETUP
to and press .
m
.
RECALL 1
(short flash time) or
m
to confirm.
m
SETUP
to and press .
m
.
.
m
4. Press
menu. Your D4 will restart automatically.
6.7

Emergency default

If you have lost your PIN code, you can still restore your D4
to its default settings.
1. Remove the batteries from the handset.
2. Press and hold
The display shows
m
3. Press
automatically.
6.8

Eco mode

Your D4 offers ECO mode function which reduces the
transmitted power and energy consumption when switched on.
To switch Eco mode on:
m
1. Press
d
2. Scroll to
m
.
n
to confirm or to return to the previous
*
while replacing the batteries.
DEFAULT
.
to confirm. Your D4 will restart
d
SETUP
, scroll to and press
m
ECO MODE
and press
m
.
.
Base settings