Recall Mode; Restore Default Settings; Emergency Default; Eco Mode - Motorola STARTAC S12 Manual

6.5

Recall mode

Depending on your country and network operator, your S12 has the recall time set as 600
ms (TIMED BR, 2). It is unlikely that you need to change this setting unless advised to do so.
m
1. Press , scroll
d
2. Scroll to RECALL
d
u
3. Press or to select
m
and press to confirm.
6.6

Restore default settings

You can restore your S12 to its default (original) settings.
All the handsets that are registered to the base will be retained.
IMPORTANT
Resetting your phone to its default settings will delete all entries in the Phonebook and
Calls list. All handset and base settings will also be reset.
m
1. Press , scroll
d
2. Scroll to DEFAULT
3. Enter the 4 digit PIN code (default = 0000) and press
m
4. Press to confirm or
automatically.
6.7

Emergency default

If you have lost your PIN code, you can still restore your S12 to its default settings.
*
1. Remove the batteries from the handset.
2. Press and hold
m
3. Press to confirm. Your S12 will restart automatically.
6.8

Eco mode

Your S12 offers ECO mode function which reduces the transmitted power and energy
consumption when switched on.
To switch Eco mode on:
m
1. Press , scroll
d
2. Scroll to ECO MODE
u d
3. Press or to select
Base settings
d
to SETUP and press
m
and press .
TIMED BR, 1 (short flash time) or
d
to SETUP and press
m
and press .
B
to return to the previous menu. Your S12 will restart
while replacing the batteries. The display shows
d
to SETUP and press
m
and press
ON or OFF and press
m
.
TIMED BR, 2
m
.
m
. The display shows
m
.
.
m
to confirm.
(long flash time)
CONFIRM ?.
DEFAULT.
25