Assembly Instructions - Brinkmann CAMPING OVEN Owner's Manual

READ ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING OR OPERATING YOUR OVEN.
Inspect contents of the box to ensure all parts are included and undamaged.
FOR MISSING PARTS, PLEASE CALL CUSTOMER SERVICE AT 800-527-0717.
Step 1
Open door and place heat distribution plate
on notched ledge over burner.
Step 2
Slide oven racks into tracks with curved
portion of racks towards the front.
Step 3
Remove regulator assembly from packaging
inside oven. Make sure regulator control
knob is in "OFF" position.
Step 4
Attach regulator assembly to oven fitting.
HAND TIGHTEN ONLY. Do not cross-thread
connections.
Step 5
Attach propane cylinder to regulator
assembly. HAND TIGHTEN ONLY. Do not
cross-thread connections.
CAUTION: Turn cylinder so that it is almost
upright, slanted slightly towards you.
The cylinder does not sit flat on
surface. See diagram below.
Step 6
Follow "Gas Leak Testing" instructions on
page 4 of this manual.
Note: Propane canister slants slightly
towards front of oven.
3

ASSEMBLY INSTRUCTIONS

(Proof of purchase will be required.)
Attach
Detach