Sirius Satellite Radio Starmate 7 User Manual page 43

Table of Contents

Advertisement

Option 3: PowerConnect Installation Instructions
1. Insert your Starmate 7 into the dock,
aligning the radio against the rear of
the dock so that the rails on the dock
fit into the mounting slots in the back
of the radio (see Figure 25 ).
2. Power on Starmate 7 radio by pressing
the p
ower Button
3. Be sure the vehicle is outside and the
antenna has a clear view of the sky.
Verify that you are receiving the SIRIUS
signal. There should at least be one bar
on the bottom left corner of the main
display screen that denotes antenna
signal strength. You can also press
and then press the D
Indicator. Press the s
bars show the strength of the signal being received (see Fig-
ure 27 ). If the signal reception is good, press and hold
return to the main display screen. You are ready to make the
audio connection.
4. You'll first need to find an available FM channel. An
available FM channel is one that's not being used
by an FM radio station in your area. When you tune
your FM radio to an available channel, you should
only hear static or silence – not talk or music. We
recommend one of the following methods to find an
available FM channel:
(see Figure 26 ).
Menu
to scroll and highlight
own Button
. The Satellite and Terrestrial
elect Button
Figure 25
Signal
to
Menu
Figure 26
Figure 27
Installation
43

Advertisement

Table of Contents
loading

Table of Contents