Download Print this page
TEFAL Turbo Pro Instructions For Use
TEFAL Turbo Pro Instructions For Use

TEFAL Turbo Pro Instructions For Use

Tefal steam iron instructions for use

Advertisement

Quick Links

Y
OUR STEAM IRON
A. Burst of steam
button
B. Spray button
C. Water tank
filler cover
D. Spray
E. Anti-calc valve
and lock
Your iron is equipped with an integrated system that
protects against the effects of lime-scale.
!
Important! (depending on the model).
Take off the soleplate protection before heating the iron.
Read these instructions carefully and make sure you keep them.
0845 602 1454 (UK - calls charged at local rate)
S
TEAM IRONING
Filling the tank
1. Place the steam control (
2. Open the cover of the water tank filler hole (
place the iron on a table (not when iron is hot),
as shown in the diagram, and then fill it.
!
Important
You should not fill the tank beyond the MAX level
(iron standing vertically on the heel).
The water to use in your iron
Your iron has been designed to operate using tap water. However, if your water is
very hard, mix it 50% tap water with 50% distilled water.
Types of water to be avoided
Do not add anything to the contents of the water tank, and do not use pure
demineralised water, water from clothes dryers, scented or softened water, water
from refrigerators, batteries or air conditioners, pure distilled water or rainwater.
These contain organic waste or mineral elements that become concentrated when
heated and cause spitting, brown staining or premature wear to your iron. Never
use additives (perfumed water, starch, perfumed oils...)
!
Important
When the appliance is used for the first time, a harmless odour and smoke may
be given off. This has no effect on the use of the appliance and will disappear
quickly.
Before using your iron with the steam function for the first time, we recommend
that you operate it in a horizontal position for a few moments, away from your
linen, i.e. press several times on the Burst of Steam button
Turbo Pro
Instructions for use
F.
HELPLINE : FOR ANY PROBLEMS OR
QUERIES, PLEASE TELEPHONE
or (01) 47 51947 (Ireland)
) on
G
L. Auto stop safety warning light
(depending on the model)
K. "Jeans" trigger
(depending on the model)
G. Dry
Maximum tank filling point
.
),
C
J. Cord
I. Thermostat light
H. Thermostat control
/ Steam
control
1
.
clip

Advertisement

loading

Summary of Contents for TEFAL Turbo Pro

  • Page 1 (iron standing vertically on the heel). The water to use in your iron Your iron has been designed to operate using tap water. However, if your water is very hard, mix it 50% tap water with 50% distilled water. Types of water to be avoided...
  • Page 2 Start with the fabrics to be ironed on a low temperature (•) and finish with those which respond best to higher temperatures (••• or MAX) If you iron a fabric made of a blend of fibres: set the temperature for the most delicate fibre.
  • Page 3 2. Put the thermostat control ( steam control ( ) on 3. Place the iron on its heel and wait around 5 minutes. 4. Unplug the iron and place over the sink horizontally. Push the lock ( free the anti-calc valve, then remove it completely.
  • Page 4 - never touch it - always leave it to cool before you put it away - never leave your iron unattended when plugged in or when the soleplate is still hot. - keep your iron away from children. Never take your iron apart: call the Helpline or consult your Approved Service Centre (see separate leaflet).