Exiting A Menu; Exit Programming Mode - Regency 4734 Owner's Manual

Technical Manuals Online! - http://www.tech-man.com
If you make a mistake while programming and you have
not yet pressed
previous selection for the option.
If you have already pressed
to exit the current menu, re-enter the correct
MUTE
menu, and locate the option.

Exiting a Menu

When you finish programming options for a particular
menu, press
MUTE

Exit Programming Mode

To exit programming mode, press
(depending on where you are in the program) until you
no longer see the scrolling menu prompts.
Changing Menu Options
Sections 4.9 through 4.13 of this manual are step-by-
step instructions for working with each programmable
menu. In the instructions, menu prompts that appear on
the LCD are shown in boldface followed by an
explanation of the possible choices for that menu option.
The instructions assume that your system retains its
factory-programmed settings.
When a menu option appears on the LCD, it has been
selected. When an option that is available does not
appear on the LCD, it has not been selected. Pressing
the key for the option both selects and de-selects the
option.
Once you've made a change and the LCD displays the
new setting for the option, press
change.
To skip over a menu option without changing it, just
press .
TEST
If you want to restore the factory programming for any
menu option, (except user codes), press
while you are working with that option.
, press
TEST MUTE
, you must press
TEST
one time.
MUTE
TEST
36
to restore the
once or twice
to complete the
or
CHM INT