Cancelling the delayed start:
set the washing machine to PAUSE by pressing the button
●
press the button
●
press the button
●
The button
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before
you make any change, you must pause the washing machine by pressing the
7
button
.
Changing a running programme is possible only by resetting it. Turn the
programme selector dial to O/OFF and then to the new programme position.
Start the new programme by depressing the button
in the tub will be not emptied out.
Interrupting a programme
Depress the button
corresponding light starts blinking . Depress the button again to restart the
programme.
Cancelling a programme
Turn the selector dial to O/OFF to cancel a programme which is running. Now
you can select a new programme.
Opening the door after the programme has started
First set the machine to pause by pressing the button
if the DOOR symbol disappears, the door can be opened.
●
if the DOOR symbol doesn't go off, it means that the machine is already
●
heating, that the water level is above the bottom edge of the door. In this
case the door cannot be opened.
If you cannot open the door but you need to open it, you have to switch the
●
machine off by turning the selector dial to O/OFF. After some minutes the
door can be opened (pay attention to the water level and
temperature!).
After closing the door, it is necessary to select the programme again and to press
7
button
.
8
until the symbol
7
again to start the programme.
8
cannot be selected with DRAIN programme
7
to interrupt a programme which is running, the
0'
is displayed;
7
again. The washing water
7
.
Use
19
7
;
.