Install Grates, Warming Rack and Battery
14
□ Insert grates so that side with four corner feet faces down. To obtain sear marks in cooked meat,
be sure to insert grates so that side with four corner feet faces down. Install warming rack into
firebox with legs inserted into sidewall holes as shown.
□ Unscrew ignitor cap and insert AAA battery into ignitor slot with positive end(+) facing outward.
Replace the ignitor cap.
□ LP tank is sold separately. Use only with an OPD (over-fill protection device) equipped LP tank. Fill
4 15
and leak check before attaching to grill and regulator (see Use and Care section).
□ Place LP tank into hole in bottom shelf with tank collar opening facing the front right leg of cart as
shown. Finger tighten tank thumbscrew to hold LP tank securely in place.
Tank Thumbscrew
24 · 464424312 · 464424512
_
+
AAA Battery
LP Tank
Warming Rack
Cooking Grate
See Use and Care section to correctly Leak Test and
perform the Burner Flame Check.
CAUTION
Failure to install tank correctly may cause gas hose
to be damaged in operation, resulting in the risk of
fire.