Chapter 2 Configuration Operation
2.1 Star Configuration Utility
When starting Configuration and selecting "Use Configuration (Without 802.1x
support)" for the first time, system will connect to the AP with best signal strength
and matching security setting. When starting Configuration, it will issue a scan
command to wireless NIC. After two seconds, the list will updated with the result of
BSS list scan. The list include most used fields, such as SSID, signal percentage,
channel used, encryption status, authentication mode, and network type. The green
handshake icon indicates the connected BSS or IBSS network. The page is shown as
below.
21
User Manual V1.0