Water Boss PRO180 Owner's Manual And Installation Manual page 16

Advanced Customer Settings, Cont.
Set Time of Regeneration
Step 3
A. Both the  and the R indicator will blink and the display reads 02 for the default Regeneration
Time of 2:00 a.m.
B. Press the R button to cycle through values 00 to 23 representing the desired Time of Regeneration
on a 24-hour clock.
Note: Set time to the nearest hour.
C. When the desired setting is displayed, press the P button.
Set Demand or Delayed Mode
Step 4
A. The R indicator will blink and the display reads - -, indicating the default setting of Demand mode.
B. Press the R button to cycle between - - (Demand mode) or
Delayed mode is active, the R indicator is displayed during Normal Operation.
− Delayed mode allows regeneration at a specific time (for example, at 2 a.m. when less water is
− Demand mode triggers a regeneration as soon as softening capacity is exhausted. This is the
C. When the desired setting is displayed, press the P button.
Set 96-Hour Mode
Step 5
A. The 96H indicator will blink and the display reads
B. Press the R button to cycle between - - and
displayed during Normal Operation. The 96-Hour mode prevents the appliance from going longer
than 4 days without a regeneration.
Note: If there is iron in your water, select 96H. On most municipal water supplies or if no water will be
used for an extended period of time (for example, going on vacation), turn this option off.
C. When the desired setting is displayed, press the P button and move to the next function.
Set powerClean™ Mode
Step 6
A. The PC indicator will blink and the display reads - -, indicating the default status of off.
B. Press the R button to cycle between - - and
mode on or off. Turning on the powerClean™ mode, turns off the 96-Hour mode.
C. When the desired setting is displayed, press the P button and return to Normal Operation.
WaterBoss Softener Two-Button Owner's Manual
typically being used).
factory default.
Advanced programming is now complete.
(Delayed mode). If the
, indicating the default status of on.
. If the 96-Hour mode is on, the 96H indicator is
. This is the only way to turn the powerClean™
5/12/2011 16