Plug In Ac Adapter; Create Your Secret Keypad Code - Linear DEFIANT SSD Owner's Manual

PLUG IN AC ADAPTER

PLUG AC ADAPTER
INTO 115 VAC OUTLET
THAT IS NOT CONTROLED
BY A LIGHT SWITCH
SCREW
AC ADAPTER

CREATE YOUR SECRET KEYPAD CODE

START HERE
CHOOSE
A SECRET
CODE
OFF
DONE
START HERE
TEST YOUR
SECRET
CODE
TEST
DONE
10
Plug AC Adapter into the AC outlet.
Secure AC Adapter with screw to prevent
un-plugging.
IMPORTANT: Be sure to plug the AC
adapter into a 115 VAC outlet that is not
controlled by a wall switch.
115 VAC
OUTLET
When power is first applied, a secret code
must be entered.
NOTE: Your secret code must be entered on
the Console's keypad, not the wireless
keypad.
Choose a one to five digit secret code to use
for arming and disarming the Console.
NOTE: For maximum security, a three to
five digit code is recommended.
Press [ ] (clears keypad if any other keys
have been pressed).
Enter any combination of 1-5 digits for your
secret code, then press [OFF].
Test your new secret code by entering it then
pressing [TEST].
Don't forget your secret code, write it down.
NOTE: If you forget your code, see the
Advanced Programming section of this
manual.
The Console will treat your secret code as a
"master" secret code. To create a
"restricted" secret code, see the Advanced
Programming section of this manual.
NOTE: The master secret code can be used
to enter Learn Mode. The restricted secret
code cannot.
To prepare for the sensor installation, place
the system in Chime Mode by entering your
secret code and pressing [CHIME].