Table of Contents
Advertisement
Foreword
We are proud to offer the Grizzly Model
H7678 18 Gauge Deep Stapler Kit. This
model is part of a growing Grizzly family of
fine pneumatic tools. When used accord-
ing to the guidelines set forth in this man-
ual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly's
commitment to customer satisfaction.
The Model H7678 features a 360° exhaust
port, comfort grip rubber handle, and eco-
nomical air consumption with low noise.
The specifications, details, and photo-
graphs in this manual represent the Model
H7678 as supplied when the manual was
prepared. However, owing to Grizzly's pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Tool Data
Staple Size ................................. 18 Gauge
Staple Length ..................................
Staple Crown ..........................................
Magazine Capacity .................. 100 Staples
Air Inlet ...........................................¼" NPT
Weight .............................................3.2 lbs.
Operating Pressure .................. 60-100 PSI
-4
-
INTRODUCTION
⁄
⁄
"-1
3
1
8
2
⁄
1
4
Contact Info
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
"
"
Read the manual before operation.
Become familiar with this stapler, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety or
operational information is not under-
stood or followed.
H7678 18 Gauge Deep Stapler Kit
P.O. Box 2069
Muncy, PA 17756
Advertisement
Table of Contents
