Bissell Lift-Off 10N4 Series User Manual page 10

O
perations
Upright cleaning mode continued
Cleaning your machine continued
2. Rinse nozzle assembly of any dirt
and debris.
Remove portable spot cleaner from
the base of the machine.
Remove the nozzle assembly from the
machine by unscrewing 3 screws and
lifting away the upper and lower nozzle.
Rinse upper and lower nozzles out
at the faucet.
Place lower nozzle back onto the
machine by hooking the tabs into the
holes on the bottom sides of the front
of the machine.
Place upper nozzle onto the lower
nozzle by hooking the tabs into the
holes on the front of the lower nozzle.
Secure with 3 screws.
3. The inside of the end caps can be
wiped out with a clean paper towel,
or for a more thorough clean, the end
caps can be taken off and rinsed clean.
4. Any loose hair or debris can be pulled
from the brush rolls and thrown away. For
a more thorough clean, follow directions
on page 15 for removal of brush rolls.
Your machine is now ready to be stored.
Note: Store cleaner in a protected,
dry area. Since this product uses
water, it must not be stored where
there is a danger of freezing.
Freezing will damage internal
components and void the warranty.
10
w w w . b i s s e l l . c o m
WARNING:
To reduce the risk of fire,
electric shock or injury unplug
from outlet before servicing.
2.
Tip:
Let all parts dry completely
and replace onto machine.