Pairing The 3D Glasses With The Projector - Epson PowerLite Home Cinema 2000 User Manual

6. Put on the 3D glasses. If you do not see a 3D image, pair the glasses with the projector.
Note: If you change the video source or you are not within range of your projector, the glasses will
enter standby mode and the indicator light will flash green. Slide the power switch on the glasses to
the Off position and then back to the On position to resume 3D viewing.

Pairing the 3D Glasses with the Projector

Charging the 3D Glasses
3D Viewing Range
Parent topic:
Related tasks
Connecting to an HDMI Video Source
Connecting to a Computer for HDMI Video and Audio
Pairing the 3D Glasses with the Projector
Pair the glasses with the projector to establish communication between them for 3D viewing.
1. Turn on the projector.
2. Set the image source to HDMI.
3. Project a 3D image.
4. Slide the power switch on the 3D glasses to the On position.
Using Basic Projector Features
50