How Functions Are Shown In This Manual; Control Panel / Connections - Studiologic NUMApiano Operation Manual

All operation buttons are marked in bold italic in this manual
(e.g. On/Off ).
If you have to press two buttons at the same time, it is
indicated by & (e.g. Split & Bass 2). You can either press both
buttons at the same time, or press and hold one button while
pressing the other button.
Key combinations with Function are always marked
this manual. First press and hold Function while pressing the
other button (e.g. Function & Transpose).
Values in the display of the NUMA Piano are marked bold
(e.g. P01).
To adjust the values, use the Value+/- buttons under the
display. To make the value change in steps of 10 rather
than 1, press and hold Value +/- below the display for a few
seconds.
You will fi nd tips and further information in text passages
marked by the Studiologic logo.
Display - Value +/- buttons
Display and value
adjustments
MIDI Module
Masterkeyboard functions
Page 16
Fuse
500mA, F, 250V
Page 4, 65
Mains - Power
100V - 240V
Page 4, 8
Control panel
Sound Bank
Sound, split and system confi guration
Page 9-11, 13,15
Connections / Back view
USB port
MIDI I/O and software updates
Page 6, 15
MIDI In-Out-Thru
MIDI send/receive
Page 16

Control panel / Connections

How functions are shown in
this manual
red in
Eff ects
Modulation / reverb eff ects
Page 12
Hold - Expression pedal
Sockets for pedal connection
Page 8, 11
Headphone out 1/2
2x 6,3mm stereo jack
Page 8
NUMA Piano by Studiologic®
Output
EQ and Volume adjustment
Page 9, 10
Fatar Touch
Create your own velocity curve
Page 14
Audio out L/R
2x 6,3mm mono jack
Page 8
Stereo audio in - Level
3,5mm stereo jack
Page 8
7
E