Mode Functions - Cobra microTALK CXT345C Owner's Manual

Mode Functions

Operation
Set DCS Privacy Codes
Mode/Power
To select a DCS privacy code:
1. After selecting a channel, press the Mode/Power
button until the DCS icon appears and the small
numbers flash on the display (01 through 83).
DCS Privacy Code
If CTCSS is turned on at the channel selected,
the display will flash the DCS icon and "OFF."
To switch from CTCSS to DCS, press the
Channel Up or Channel Down button while
Channel Button
the display is flashing "OFF." The display will
then show the small numbers flashing and you
will then be able to proceed to step 2.
2. Press using the Channel Up or Channel Down button to select a DCS
privacy code. You can hold the Up or Down button for fast advance.
3. When DCS privacy code is displayed, choose one of the following:
a. Press the Mode/Power button to enter the new setting and
proceed to other functions.
b. Press the Lock button to enter the new setting and return to
Standby mode.
c. Do not press any buttons for 15 seconds to enter the new setting
and return to Standby mode.
Voice Activated Transmit (VOX)
In VOX mode, your microTALK radio can be used "hands-free," automatically
®
transmitting when you speak. You can set the VOX sensitivity level to fit the
volume of your voice and avoid transmissions triggered by background noise.
Mode/Power To turn VOX mode on or off:
1. Press the Mode/Power button until the VOX icon
flashes on the display. The current On or Off
setting is displayed.
2. Press the Channel Up or Channel Down
VOX Icon
button to turn VOX On or Off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
Channel Button
selected On or Off setting and proceed
to other functions.
b. Press the Lock button to enter the selected On
or Off setting and return to Standby mode.
8
English
Introduction
Mode/Power
•
VOX Sensitivity Level
Channel Button
•
Operation
Customer Assistance Warranty
To set VOX sensitivity:
1. Press the Mode/Power button until the VOX icon
flashes and the current sensitivity level is displayed.
The current VOX sensitivity level is displayed
with letters "LE" and a Number 1 through
5, with Number 5 being the most sensitive
level and Number 1 being the least
sensitive level.
2. Press the Channel Up or Channel Down
button to change the setting.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
selected setting and proceed to other functions.
b. Press the Lock button to enter the selected
setting and return to Standby mode.
Nothing Comes Close to a Cobra
9
®