To Connect Your Communicator To A Pc - Nokia 9210i Software Manual

1 Click the Windows Start button and select Programs > Windows Explorer.
2 On the CD-ROM drive, locate a file called Nokia9210.EXE and double-click it.
The CD-ROM user interface opens.
3 You can find PC Suite for Nokia 9210i Communicator in the "Software for PC"
section. Select the program and click Install. The installation wizard will guide
you through the installation process.

To connect your communicator to a PC

1 If you use a cable, connect the large connector at one end of the connection
cable into a serial port (COM) at the back of your PC, and the other smaller
connector into your communicator. If you use infrared, check that the IrDA
driver is already installed on the PC. Go to the Control Panel. If there is an icon
called Infrared, the driver has been installed.
2 Double-click the PC Suite icon
correct communication port. If the icon looks like
already been established and you do not have to select the port.
3 If you use an infrared connection, make sure that the infrared port of the
communicator faces the infrared port of the PC. Open your communicator and
Press Chr + (the key with the infrared symbol) to activate the infrared link
on your communicator.
4 The PC Suite software should now connect to your communicator
automatically.
on the Windows taskbar and select the
, the connection has
Tip: You can use PC Suite
for Nokia 9210i
Communicator also with
Nokia 9210 Communicator
and Nokia 9290
Communicator.
Tip: You can also use the
cable and infrared
connections with the
Advanced Desktop Stand
DCH-10. For more
information, see Accessories
Guide.
Copyright © 2000-2002 Nokia. All rights reserved.
3