Wheel Removal - Honda CTX200 Owner's Manual

WHEEL REMOVAL

Refer to the Safety Precautions on page
Front Wheel Removal
Raise the front wheel off the ground by
1.
placing a support block under the engine.
2. Remove the speedometer cable set screw
( ) and disconnect the speedometer
1
cable ( ). 2
Remove the front axle holder nuts (3)
3.
and the front axle holder (4).
Unscrew the axle (5). Remove the wheel.
4.
Do not depress the brake lever when the
wheel is off the motorcycle. The caliper
piston will be forced out of the cylinder with
subsequent loss of brake fluid. If this occurs,
servicing of the brake system will be
necessary. See your Honda dealer for this
service.
53 .
(3)
(5)
(1) Screw
(2) Speedometer cable
(3) Axle holder nuts
(2)
(3)
(4)
(4) Axle holder
(5) Axle
(1)
79