HUSTLER 3500 Owner's Manual page 43

4. The 'F' dimension should be between 0.075" and 0.175"
(1.9 mm - 4.4 mm) less than 'R' dimension.
5. If the toe-in must be re-adjusted to meet the dimensional
requirements, loosen the jam nuts on either end of the tie
rod. Figure 4-38
6. Once the jam nuts are both loose and backed off, rotate
the tie rod in the appropriate direction and adjust
accordingly to meet the dimensional requirements of step
#4.
7. Tighten the jam nuts on either end of the tie rod. Make
sure the ball joints on each end move freely once jam
nuts are tightened.
Front clevis
Front of
tractor
F = R in.(mm) - 0.125 in. (3.175 mm)
Figure 4-37
109627_0910
Brake linkage
Jam nut
Figure 4-36
'F' Dimension
Adjustable tie-rod
'R' Dimension
Tie rod
4-15
Jam nut
Figure 4-38