Ethernet Configuration; Factory Reset; Upgrade; Auto Standby - Triax TSC 114 Operating Manual

Ethernet Configuration

Option for future functionality.

Factory Reset

This will restore all "Default Settings" The system
will prompt the user to input a password (default
"0 0 0 0 ") to activate "Factory Reset".

Upgrade

Refer to SOFTWARE UPGRADE Section on page
39 for details.

Auto Standby

Enables/Disables the "Auto Standby". The user
can select 1 Hr, 2Hrs or 3 Hrs, (Default setting is 3
Hrs). If the receiver receives no commands, either
from the Remote Control or Front Panel buttons,
for the set time, the receiver will automatically
enter standby. This feature can be disabled in the
menu.
26