Dvb-T Auto Search; Dvb-T Manual Search - Triax TSC 114 Operating Manual

DVB-T Auto Search

After selecting the "Auto Search" page, the
receiver will scan all frequencies one by one for
the selected country.
During scanning, you can press the "EXIT" key to
stop the scanning process and exit.
If any programmes are detected and the scanning
process has finished the system will exit the
scanning page, save the programmes and return
to the "installation menu".

DVB-T Manual Search

If you know the frequency of the channels, or
if you want to scan a channel at a particular
frequency, you can select manual search.
Move the cursor to "Manual Search" using the
"UP/DOWN" button when in the "installation
menu". Press "ENTER" to select the manual
search page.
To carry out a manual search, you need to
configure the relevant parameters including:
(1) Frequency (kHz): The default frequency
depends on the selected country, you can input
relevant information to modify it.
(2) Bandwidth: The default value of bandwidth
depends on the selected country. It can be set to
6 MHz,7 MHz, or 8 MHz.
(3) High-light "Start Search" and Press the
"ENTER" button to start manual scan.
(4) Press the 'EXIT' button to return to normal
viewing.
16