Using Fast Text Functions - Triax SR 110 Operating Manual

Using Fast text Functions

The coloured keys on the remote control unit are used for Fast text and will become
active after calling up a further Teletext page. You can navigate there directly via the
small coloured keys on the remote control unit.

Press the desired key.
M/P Multipicture
Please press the M/P key in order to access Multipicture mode. On your screen will
now appear 9 programmes in parallel, starting with the current programme.
You can navigate the yellow marking using the keys CH▼, CH▲, V+ and V-. The
marked programme is in real time, the non-marked programmes show only still pic-
tures.
In order to activate the desired programme, you mark it and then press the OK key or
the EXIT key.
When pressing the EXIT key, you leave the Multipicture mode. The programme that
was marked last will appear as a full image on your screen.
MUTE
When pressing the MUTE key, the sound is switched off. When pressing the MUTE
key again, the sound is switched on again.
FAV

Press the FAV key.
On the screen will appear your specified favourites (see above).

Select a programme from your list of favourites.

To select, press the OK key.

Using the V+ and V - keys, you can switch between the
programme groups.
40