Table of Contents
Advertisement
Draining & Re-Filling Hydraulic
Reservoir
Tools Needed
Wrench 10mm ................................................... 1
Large Adjustable Wrench .................................. 1
Oil Catch Pan .................................................... 1
To drain and re-fill the hydraulic reservoir:
1.
DISCONNECT MACHINE FROM POWER!
2.
Remove the rear access panel.
3.
Unscrew the filler cap, and take out the filter
from the filler neck (see Figure 55).
Filler
Neck
Figure 55. Hydraulic reservoir filler components.
HYDRAULIC INJECTION
Hydraulic oil leaks can
be under sufficient pres-
sure to penetrate your
skin
bloodstream. If oil is
injected into any part of
your body, it is a medical
emergency and may, if
not treated immediately,
result in severe infection,
permanent disability, or
even death.
G0646/G0647 50/65 Ton Ironworker
Qty
Filter
Filler
Cap
HAZARD.
and
enter
your
4.
Remove the drip pan and reservoir access
plate from the top of the reservoir (see Figure
56).
Drip Pan
Access Plate
Figure 56. Top of hydraulic reservoir.
5.
Position an oil catch pan under the outlet con-
nection (see Figure 57) of the reservoir, and
carefully remove the outlet hose to drain the
contents of the reservoir.
Outlet Hose Connection
Figure 57. Hydraulic reservoir outlet hose
connection.
-41-
Advertisement
Table of Contents
