Getting Ready To Play; Connect The Ac Adaptor - Roland C-30 Owner's Manual

Getting Ready to Play

Connect the AC adaptor

1.
In the operating panel, turn the [Power] switch off (the switch should be in the outward position).
2.
Connect the power cord to the body of the AC adaptor,
which is fastened to the underside of the C-30.
3.
Plug the power cord (AC adaptor) into an electrical
outlet.
• Do not use any AC adaptor other than the included
one.
• If you won't be using the C-30 for an extended period
of time, disconnect the power cord from the electrical
outlet.
When you purchase the C-30, the AC adaptor is fastened to the bottom panel with a band. It is possible to remove the AC
adaptor, but normally you should leave it attached to the C-30.
◆
If you've removed the AC adaptor and wish to reattach it to the C-30,
fasten it with the band so that the printed surface of the AC adaptor is
facing up toward the bottom of the C-30, and the surface with the
indicator is facing downward.
* Fasten the AC adaptor securely so that it will not fall.
12
To the AC adaptor connector
(already connected)
AC adaptor
Indicator
Power cord
AC Outlet
Band
Indicator